Molybdenum Wire (Mo) is a commonly utilized material in the spray wire sector, because of its promising wear and scuff resistance capabilities. To counteract the wear mechanisms, a molybdenum coating with a higher hardness and low friction coefficient is created. As a result of the production of molybdenum oxide in the coating, molybdenum in the wire core provides superior scuff resistance.
Molybdenum Spray Wire is used as an overlay coating to prevent surface damage and degradation in a variety of industrial applications, including bearings, seals, and shafts. When compared to uncoated hardened steel, molybdenum coatings exhibit reduced friction, excellent sliding, and wear resistance. Because of their outstanding tribological qualities, thermal spray coatings of molybdenum and related alloys are employed for many automobile parts.
Our Molybdenum Spray Wire is a high-purity (99.95%) molybdenum wire designed exclusively for thermal spraying. It creates dense, well-bonded coatings with good corrosion resistance and wear resistance. It's especially good for things like piston rings, shift forks, and synchronizing rings, which are prone to scuffing and galling.
We are the leading molybdenum powder manufacturers in India, we supply molybdenum spray wire all over the world like in the USA, UK China, Japan, UAE, Russia, and Australia. We also manufacture gypsum powder, calcite powder, dolomite powder, fly ash powder, etc.
Vehicle and machine parts that are subjected to a high mechanical stress benefit from thin layers of molybdenum because they have exceptional sliding capabilities and a high wear resistance. A flame spraying procedure protects piston rings, synchronizer rings, synchronizer bodies, shift forks, and other elements of motor vehicles with coatings of molybdenum.
We use a powder metallurgical technique to make molybdenum spray wire. This ensures that our materials are of great purity, allowing our customers to carry out efficient coating operations with exceptionally consistent and trustworthy outcomes. We offer the most competitive molybdenum spray wire price on the market, as well as the highest quality.
Molybdenum Spray Wire has a number of uses, some of which are described below:
It is protected with wear-resistant coatings.
It is resistant to corrosion.
It's anti-aggravating.
Molybdenum Spray Wire Characteristics
|
Typical Hardness |
HRC 15-35 |
|
Bond Strength |
79000 psi |
|
Deposit Rate |
10 lbs/hr/100A |
|
Deposit Efficiency |
75% |
|
Wire Coverage |
1.1 oz/ft2/mil |
|
Surface Texture |
*Variable |
Molybdenum Spray Wire was created utilizing an HVCW system under a variety of conditions, and the resulting coatings were characterized by SEM, WDS, and XRD phase analysis. The coatings were also put through a wear test. The microhardness and wear performance of a coating are affected by oxidation.
The mechanism of aluminium oxide generation in coatings is addressed, and the oxygen content of the coatings is connected. The pin on disc wear test was used to investigate mechanical qualities like wear and friction. APS created a Mo-NiCrBSi coating that was tested for wear and friction qualities. The HVCW wire and APS coatings might then be compared.
